Second-hand Steelmaking Equipment
We currently have available the following second-hand machines, belonging to the CL Industrial Group, at their plant CORRUGADOS AZPEITIA S.L.U., in GIPUZKOA, SPAIN:
Equipment for scrap handling & transportation:
- 5 Scrapyard cranes,
- 2 Scrap buckets,
- 2 Blast Furnace scrap bucket carriers,
- 2 Scrap Cleaning Machines,
- 1 Scrap metal scale,
- 1 Gantry for radioactive scrap detection,
- 5 Scrap loading trucks.
Electric Arc Furnace (“EAF”).
LF Ladle Furnace in which mixtures of secondary metallurgy alloys are made.
Conveyor Line for Liquid Steel Ladles:
- Billet Continuous Casting Machine
- Billet cutting machines using oxy-fuel technology
- Moving beam Furnace for Bill Reheating
8 to 10 mm Rolling Mill
12 to 32 mm Rolling Mill
Transformation Substation of 150 MVA de 138/21 or 30/30 kV.
Plant Electric and Electronic Equipment
- Electric Arc Furnace (EAF) and Laddle Furnace LF – (where alloy mixtures and secondary metallurgy are made): ferroalloys, 1+1 transformer, 1 hydraulic unit, 1 level 1 automation, 1+ 1 spectrometer + polisher, 1 sampler, 1 Celox measuring system, 1 set of refrigerated cables, 1 graphite + 1 injection system, 1 graphite injection + 1 lime injection synchronised system , 15+4 biplane electrodes.
- Liquid Steel Ladle Conveyor Line: 1 EAF & LF laddle-carrier, 6 Ladles for Billet Continuous Rolling Mill feed.
- 6x Billet Continous Rolling Lines and Billet Cutting Mill using oxi-fuel technology: 1 rotating turret, 2 carros 2 Tundish Distributors Carrier (Tundish), 2 3×3 Tundish Distributors, 6 Rolling Mill operating x off-line, 1 Measuring system to control steel level in Rolling Mill, 1 Hydraulic System, water pumps, 1 Secondary Refrigeration and Billet Steering System, 1 Temperature Measuring System, 1 Hardening System by flame cutting (oxicut), 1 Roller System, 1 billet to plate delivery set, 1 galloping refrigerating plate, 1 exit stand, 1 steam water evacuation, 1 false rigid billet system, Level 1 Automation, including Machine Control Centre (MCC).
Rolling Mill Layout
- Billet Reheating Furnace: 1 Boiler & Burners, 1 Heat Recovery Unit, 1 Gas & Combustion Control Stand, 1 Chimney and Combustion Smoke Purification System.
- 8-10 mm diameter Rolling Mill: 1x Loading Stand, 1x Magnet with equaliser and forklift for billet loading, 1x Roller Furnace entrance stand, 1x System of transfer of billets to the Rolling Mill, 1x Descaler, 1x Billet Welding machine, 1x set of high/medium voltage panels (30 kv), 15x High/Low Voltage Transformers, 1x set of electrical panels, Rolling Mill Low Voltage Motors Control Centre (MCC), 23x Rolling Stands, including extensions, 5 of them in V-format, 1x Set of Loopers, 1x Set of FWC (Flying Width Changing) Side Trimmer; and emergency shears, 1x Thermomechanical Treatment Set, 1x Double Trough, 1x Walking beam type bar cooling stand, 1x Bar transfer Stand, 1x Exit Stand, 1x Cooling Stand, 1 Cold-cutting Shears, 1x Set of Bidding, Evacuation Transfer Machines, 2x Exit Spooler or Double Stand with braking rows, 1x Roller, 1x Binder, 1x Wire Rod Mill, exit machine with single-pass block, Coil Forming Mill and Compacting Rollers, 1x Set of Air-Oil Station, 3x Air-compression and Hydraulics Lubrication Stations.
- 12 to 32 mm diameter Rolling Mill: High/medium voltage switchgears (30 kv) 1x High/low transformers Set, 1x Rolling Mill Motor drive panels, 1 Scaler, 1 Billet Welding Machine, 21x Rolling Mill Stand Motors and Reducers, 21 Rolling Mill Stands, including extensions, rolling and auxiliary guides, 3 being in V, 1x Loopers, 1x High-speed Rotating Shears for blunting and emergency, 1x Thermo-mechanical treatment, 1x entry cooling beam with sliders, 1x walking beam type bar cooling stand, 1 exit cooling conveyor stand, 1 cooling exit beam, 1 cold-cutting shear, 1 cold-cutting shear, 1 exit batching path roller, 1x Binding machine, 1x evacuation transfer stand, 1 air-oil station, 3x lubrication, air compression and hydraulic stations.
- 150 MVA Transformer Substation of 138/21 or 30/ 30 kV, 1 Var. Static Compensator.
- 1x set Plant’s Electrical and Electronic Components, 1x set Rolling Mill Harmonic Filters, 7th and 11th.